Four-leg, multi-level design. Multi-layer sandwich shelves, isolated using the proprietary BBS (Balancing Board System). Frame constructed from carefully selected steel grades with differing mechanical properties.
In the presented configuration, the system consists of three four-level modules placed side by side. Each module operates as an independent unit — effectively a separate rack — with no direct mechanical connection to adjacent sections.
This approach eliminates resonant bridges between modules, enabling complete mechanical isolation of individual components. In practice, it allows deliberate separation of devices that may influence each other — for example, an external turntable motor can be placed on one module, while the turntable chassis and platter are located on a neighboring module, with no direct mechanical coupling between them (apart from the drive system itself).
Images may also present alternative finish options, illustrating available color and material variations.
The CONSONANCE/BBS represents a reference-level design within the Rogoz Audio range, engineered for systems with the highest demands in terms of load capacity and vibration control.
Structure and vibration control
The load-bearing structure is designed for exceptional stiffness and resistance to deformation, achieved through double-wall steel profiles at critical junctions.
Additional internal steel sections create a “profile within profile” structure, significantly increasing rigidity.
Different steel grades are used to shape mechanical behavior across frequency ranges.
Each level is isolated using the proprietary BBS system, enabling controlled motion while maintaining point support.
Vibration energy is dissipated progressively through motion, friction, and internal damping.
Load capacity and stability
The structure maintains full anti-vibration performance under loads of up to 150 kg per shelf.
Total system load can reach approximately 1.8 tonnes without compromising performance.
TECHNICAL SPECIFICATIONS
Overall height: 998 mm;
Overall width: 1860 mm (620 mm / each module);
Overall depth: 560 mm;
Leg profile: 60 x 30 mm;
Top shelves: 1860 mm x 560 x 50 mm
(620 x 560 x 50 mm /each module);
Center and bottom shelves: 560 x 560 x 40 mm / each module;
Usable distance between the shelves (moving upwards): 290, 190, 160 mm;
Maximum load for each shelf: up to 150 kg (total: 1800 kg);
Ballast: quartz sand
A COMPLETE SET INCLUDES
3 steel frames;
12 shelves (MDF/HDF/MDF – sandwitch structure);
12 height-adjustable spikes;
BBS under each shelf;
12 massive anti-scratch disks protecting the floor
CUSTOM CONFIGURATION
Custom configurations are available upon request — including dimensions, layout, and finish options. Each unit can be precisely tailored to match a specific audio system and its operating conditions.
